HOME

FLAT BOTTOM

"V" BOTTOM

GIANT SCALE

TRAINER FLOATS

MICRO FLYER

TRIDENT FLOATS

T-28 FLOATS

APPRENTICE

SLOW STICK

THE "CUDA"

DLE 20 PLATE

SUPPLIES

FINISHING

EPOXY-CLOTH

COVERING

GALLERY

EVENTS

Q & A

ABOUT US

CONTACT

 

 

 

 

 

usa

 

 

 

 

New! "Slow Stick" Flying Boat Kit

Slow Stick Boat "V2"..........only $29.99

PAINTED SNOOPY ..........only $5.00

PAINTED WOODSTOCK ..........only $5.00

~~~~~~~~~~~~~~~

Shipping to CANADA?

---ADD THIS $15.00 SHIPPING TO YOUR CART. ---(AFTER YOU PICK YOUR FLOATS)

~~~~~~~~~~~~~~~

 

See it flying! Painted with Baron Red - all up weight is 3.2oz.

 

 

It comes ready to assemble and paint, 2 coats of light spackle then paint with latex paint. Use Gorilla glue.

The Cockpit hatch cover is held in place with magnets. The hatch can be water proofed with Silicone or vasiline. (I skipped this)

Woodstock is also available.

Compartment for your lipo battery keeping the CG low.

*Kit includes all that is pictured here and the front & rear mounting spars, plywood braces, magnets, washers, Bamboo, everything you need to build your SS Boat. The a painted Snoopy pilot is extra.

The front 3/8" balsa mount is 6" tall and the rear mount is 5 5/8" tall, the front mount is 6 3/4" back from the nose and the mounts are 9" apart.

Close up of the mount, 1/8" plywood and a 1/8" bamboo dowel for a rubber band.

Close up of the magnets holding cockpit floor in place, washers are glued to the base with Gorilla Glue. The magnets are inbedded in the foam and glued, use a soldering iron to make a hole for the magnets. (note slot for battery wire) Drill the cockpit floor and Snoopy and add bamboo dowels for strength.

Close up of a magnet and base of mount, drill up the mount and glue in a bamboo dowel let it stick out and Gorilla glue into the foam boat as well for added strength.

~~~~~~~~~~~~~~~

You don't need a PayPal account to order you can use your credit card....

(*TURN YOUR POP UP BLOCKER OFF BEFORE ORDERING!)

$9.99 SHIPPING IS TO CONTINENTAL U.S.A. ONLY